View all products

Radial cylinder design with a longitudinal weld

This radial wedge wire cylinder is intended for filtration from the inside out. The filter surface is located on the inside, with the profiles running radially on the inside and the support rods positioned axially on the outside of the filter tube.

For this radial cylinder construction, we cut a standard FOTI filter tube open lengthways between two support rods. The filter is then flattened and rolled in the opposite direction to the desired diameter, so that the support rods are positioned on the outside. Finally, the outermost support rods are welded together to form a sturdy longitudinal weld. This design is available for diameters of 150 mm and above.

Cilinder radiale uitvoering met langlasnaad 2 0

Start your filtration project today.

Receive technical advice and a targeted quote.

Specifications

Frequently asked questions

FOTI stands for From Outside To Inside. In this configuration, the medium flows from the outside to the inside of the filter element. The outside forms the smooth filter surface, making it relatively easy to remove accumulated impurities.

FITO stands for From Inside To Outside. Here, the medium flows from the inside to the outside of the filter element. The inside forms the smooth filter surface. This configuration is, for example, typically cleaned by means of backwashing. 

The most suitable configuration depends on the application, the required flow direction and the way the filter element needs to be cleaned. 

The difference is in the direction of the slot openings.

In a radial configuration, the slot openings run around the filter element. This is the configuration used, among other applications, for our wedge wire filter tubes. The support bars run longitudinally along the tube, while the profile wire is wrapped around the tube.

In an axial configuration, the slot openings run along the length of the filter element. This configuration is used, among other applications, for cylinders and screen baskets.

The choice between axial and radial slots depends on the construction and application of the filter element. 

Yes. In addition to manufacturing the wedge wire filter structure, Unislot can further finish filter elements according to technical drawings, specifications or individual requirements.

This can include specific end pieces, flanges, joints, reinforcement rings or other machining operations. Various finishing options are also available, including deburring, machining for tighter tolerances and electropolishing.

This allows Unislot to supply finished filter elements as components, manufactured according to the customer's technical specifications.

Unislot's focus is the manufacturing of wedge wire filter elements. We manufacture according to technical drawings and specifications, but we do not position ourselves as an engineering company for complete filtration systems.

Yes. Unislot produces custom-built wedge wire filter elements from a single piece to series production.

This means that a project does not need to involve a large production run. We can also produce individual replacement parts, prototypes or specific custom-made filter elements.

Production is based on the required design, dimensions, slot opening, material and any additional specifications. 

Quality control is an integral part of the Unislot production process.

Unislot operates under an ISO 9001-certified quality management system and works with defined production steps and controlled material flow and storage. 

In addition, each filter element is manually inspected before it is packed. This means that we do not only monitor the production process, but also inspect the finished filter element.

The combination of structured manufacturing, process control and manual inspection forms the basis of our quality approach.